Replies to This Discussion

Permalink Reply by tommy b on July 23, 2009 at 2:07pm

We've been doing it for over a year. It's rudimentary but it works. Send me an email & I'd be happy to forward the instructions (from Coffee Eq. Co.) to you. I'd be able to help w/ any follow-up questions as well.

Permalink Reply by Mike Gregory on July 24, 2009 at 8:29pm

Aaron, just to make sure you know what you'll be dealing with if you take the CoEqCo instructions from tommy b, you will be able to create and delete lists, but not edit lists. So whenever a recipe changes, you gotta recreate the whole thing. It's not really worthwhile, but it is cool. You will also need the Clovernet module (ehternet adapter) installed.

Permalink Reply by Aaron on July 28, 2009 at 6:19am

Tommy--I sent you an email via your website; hope that works ok for you. Thanks!

ro aster at rosetta coffee co. com

Permalink Reply by Aaron on July 30, 2009 at 6:22am

Tommy: Does this end up working well for your shop or is it really cumbersome? I think that there should be a way to recreate some of the automation that was previously in Clovernet.

tommy b said:

We've been doing it for over a year. It's rudimentary but it works. Send me an email & I'd be happy to forward the instructions (from Coffee Eq. Co.) to you. I'd be able to help w/ any follow-up questions as well.

Permalink Reply by Aaron on July 30, 2009 at 8:50pm

I know this is a long shot, but it looks as if our firmware is too old to use this module. Does anyone know how to update the firmware on a machine? Thanks in advance!