Interest in a Juper Jolly Mod?

Hi,

 

So I have been working on a little Mazzer Super Jolly Mod.   Just wandering if there is any interest out there for people to purchase this? See the brass funnel at the bottom of doser shoot.

 

I was thinking of a price point.... Like $5, just to cover my material and time.

 

As you can see, the brass aluminum has a nice look.  This thing really helps keep the grounds from going all over the place.  I will post a video if you think you want one.

 

Just wandering what your thoughts are.

 

Thanks

 

 

Views: 1100

▶ Reply to This

Replies to This Discussion

Permalink Reply by Kevin Ayers on May 1, 2011 at 1:40pm
This thing is pretty similar. If you could make yours 5$ and its metal instead of plastic I would think there would be some interest, considering the plastic version is 10 plus shipping.
Permalink Reply by Matthew on May 1, 2011 at 1:59pm
Thanks for the reply Kevin.  Do you think its to low of a price point?   I would want to charge for shipping too.   But I think 75 cents for the envelope and US mail stamp would cover it.
Permalink Reply by Mike McGinness on May 1, 2011 at 5:31pm

Or you just download the template and cut them out of empy milk jugs:)



Kevin Ayers said:

This thing is pretty similar. If you could make yours 5$ and its metal instead of plastic I would think there would be some interest, considering the plastic version is 10 plus shipping.
Permalink Reply by Matthew on May 1, 2011 at 5:43pm
I guess so? But the milk jug look is not as classy :)
Permalink Reply by Dustin DeMers on May 1, 2011 at 11:55pm
Looks pretty cool to me, got any pics of what it looks like outside of the grinder?
Permalink Reply by Matthew on May 2, 2011 at 5:40am
I can get some pic's of it.   Last night I had a thought about a small design change so I will work on that.
Permalink Reply by Tom Mohr on May 2, 2011 at 6:17am
will that work on any grinder.
Permalink Reply by Matthew on May 2, 2011 at 6:19am
Not sure about any grinder.   I have a Super Jolly that I have tested with.   If the doser opening is very close to the same size it should work.
Permalink Reply by Tom Mohr on May 2, 2011 at 8:52pm
how do you put it on I have a mdx
Permalink Reply by Matt Swenson on May 2, 2011 at 10:15pm
I'd have some interest in this.
Permalink Reply by Matthew on May 3, 2011 at 6:08am
Sorry, I was unable to get more pics last night.   Its been a crazy past few days.   The funnel is made from aluminum so its pretty flexible, yet springy.  This allows for you to squeeze it into place, and when you slowly re-leave it, the natural spring holds it in place nice and tight.  I am still working on a few things for it, I want to work on a bolt on solution.   I should be ready to send a few out, in about a week.
Permalink Reply by Tom Mohr on May 3, 2011 at 7:45am

let me know when you are ready



Matthew said:

Sorry, I was unable to get more pics last night.   Its been a crazy past few days.   The funnel is made from aluminum so its pretty flexible, yet springy.  This allows for you to squeeze it into place, and when you slowly re-leave it, the natural spring holds it in place nice and tight.  I am still working on a few things for it, I want to work on a bolt on solution.   I should be ready to send a few out, in about a week.

▶ Reply to Discussion

RSS

Barista Exchange Partners

Partner Discount Series Offers

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2024   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service