Replies to This Discussion

Permalink Reply by Brian Bandy on February 16, 2012 at 9:25am

No problam Scott, 3 years ago I myself was in charge of the production floor and design at Cirqua, and I can assure you that the HP800, LP150,T&O, and the new Easy systems were all built on my production floor in Camarillo by Cirqua.

• ▶ Reply

Permalink Reply by Joseph on February 18, 2012 at 6:55am

This is the contact at Global Customized :Stacy Beeman [singram@gcwater.com]. For technical support and parts call David Beeman: 818-612-7203. They have been very helpful so far.

• ▶ Reply

Permalink Reply by JP Denyer on February 20, 2012 at 9:55am

Congrats to Global Customized Water and Stacy and David Beeman.  I worked with them as their creative help when they were Cirqua, and quite frankly, David's knowledge and Stacy's helpfulness, I am glad to see them back in the saddle.  Congratulations and thank you for providing this information.  Those of us can all breathe now that David and Stacy are back.

Coffee and Tea will always taste better because of this water.

JP

• ▶ Reply

Permalink Reply by Cindy Pope on March 23, 2012 at 2:43pm

My company used to service equipment for Cirqua before they went out of business. If you are in the greater Chicagoland area and need help, send me an email at cindy@americanpurewater.com and we may be able to help you.

 

• ▶ Reply

Permalink Reply by JP Denyer on March 27, 2012 at 8:09am

Hi,

I stopped by their office the week after they returned from New York, where they attended Coffee Fest.  I know they will also be at SCAA.  I can get you packets of The Formula which is the travel size of Cirqua Customized Water, now Global Customized Water, for those of you doing presentations on the road...just convo me. (www.denyerdesigns.com) & (drawisaid@sbcglobal.com).  They are still in business and can help you with your machines and filters for the machines. Hope does spring eternal! -- JP

• ▶ Reply

Permalink Reply by Sriley on April 2, 2012 at 12:33pm

All,

Need help and tried to call customized water but Brian's VM box is full. I have a leak on the fitting that is connected to the blue tank (LP150). Need to know if the entire fitting can be removed and replace with one from a home depot or Lowes etc... The leak almost appears to be coming from the fitting itself and not at a joint. Also need to get replacement filters.

Can anyone assist???

Sean

• ▶ Reply

Permalink Reply by Faizan on April 17, 2012 at 5:36am

Call  PRODEW INC @ 770-420-3060. They are maintaining alot of these Cirqua RO Systems and stock replacements parts and filters for these systems. They should be able to provide you with comparable replacement parts for all Cirqua systems.

• ▶ Reply

Permalink Reply by Diane Maler on April 17, 2012 at 3:38pm

Hi Joseph,

At Espresso Cielo in Santa Monica we went through the same thing.  I was able to find Tom Schimmel.  His phone number is 805-297-3133.  He used to work for Cirqua and then started his own company servicing water filtration systems.  Tom is amazing, responsive, knowledgeable, and helpful.  

• ▶ Reply

Permalink Reply by JP Denyer on April 18, 2012 at 1:11am

Yeah to Tom Schimmel!  He's a real good guy! Go Tom!!!  Silver lining people, silver lining!  VERY Knowledgeable, worked side by side with Tom when we were at Cirqua.  He answered all my questions when I worked on the brochures and ads! Thanks Diane. - JP

Diane Maler said:

Hi Joseph,

At Espresso Cielo in Santa Monica we went through the same thing.  I was able to find Tom Schimmel.  His phone number is 805-297-3133.  He used to work for Cirqua and then started his own company servicing water filtration systems.  Tom is amazing, responsive, knowledgeable, and helpful.  

• ▶ Reply

Permalink Reply by PAUL HUNTER on January 28, 2022 at 3:24pm

hey, are you still around?

Scott said:

Cirqua didn't manufacture anything, as far as I know.  They just rebranded other peoples products.  Their RO systems were made by Nimbus Water.  Nanos by someone else.  Water Tec of Tucson carries parts (www.water-tec.com).  What do you need?

 

 

-Scott

 

• ▶ Reply

▶ Reply to Discussion

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page