Replies to This Discussion

Permalink Reply by Joona Suominen on October 4, 2010 at 8:40am

Could you post some bigger pictures. Especially on the grouphead and the badge.


Doesn't seem to be an ordinary e61 head since there's a screw hole on the showerscreen.

• ▶ Reply

Permalink Reply by Greg Aliff on October 4, 2010 at 8:43am

I'm posting bigger pics now. That isn't a screw hole. From what i could tell the seal is all that holds this screen in. There is a lip on the screen that i guess the seal would fit against and hold it in place.

• ▶ Reply

Permalink Reply by Phoebe Aceto on October 4, 2010 at 10:58am

I have this type of screen on my faema.. here is a link to the gaskets I use for it,
http://www.espressoparts.com/cgi-bin/ep.pl?pgm=co_disp&func=dis...

• ▶ Reply

Permalink Reply by Greg Aliff on October 4, 2010 at 10:59am

am i correct when i said that the gasket is all that holds this screen in place?

• ▶ Reply

Permalink Reply by Joona Suominen on October 4, 2010 at 2:17pm

After all it seems to be an e61 type grouphead. If that's the case, gasket is the only thing keeping the shower screen in it's place.

• ▶ Reply

Permalink Reply by Phil Proteau on October 4, 2010 at 6:37pm

Yes, use the Faema gaskets and screens.

• ▶ Reply

▶ Reply to Discussion