Has anyone seen the plastic coffee cup lid applicator that McD's uses in their McCafe?
It looks like a "top hat" and applies even pressure around the rim of the lid - perfect every time.
I can't find anywhere to buy this, and am hoping someone in the group can point me in the right direction.

Thanks,

Ron, the Country Guy

Views: 1020

Reply to This

Replies to This Discussion

HEY MANE YOU GUYZ SEEN DAT NEW EXPRESSO MACHINE WHAT MAKE DEM DRINKS FER YE? YOU AIN'T GOTTA DO A GOLBURN THING! WOO! RECKON IT KIN MAKE SOME BUSCH LIGHT FLAVERED EXPRESSO?
Just because you would not use the top hat why do you have to make fun of someone who does. I would not use it either but i am not so shallow as to think i am right all the time. I do not know the answer to the question he asked and i guess you don't either. But my mother taught me if i can't say something nice don't say anything at all.

Jared Rutledge said:
HEY MANE YOU GUYZ SEEN DAT NEW EXPRESSO MACHINE WHAT MAKE DEM DRINKS FER YE? YOU AIN'T GOTTA DO A GOLBURN THING! WOO! RECKON IT KIN MAKE SOME BUSCH LIGHT FLAVERED EXPRESSO?


Kathy Fadorsen said:
Just because you would not use the top hat why do you have to make fun of someone who does. I would not use it either but i am not so shallow as to think i am right all the time. I do not know the answer to the question he asked and i guess you don't either. But my mother taught me if i can't say something nice don't say anything at all.

Jared Rutledge said:
HEY MANE YOU GUYZ SEEN DAT NEW EXPRESSO MACHINE WHAT MAKE DEM DRINKS FER YE? YOU AIN'T GOTTA DO A GOLBURN THING! WOO! RECKON IT KIN MAKE SOME BUSCH LIGHT FLAVERED EXPRESSO?
Hi, I 'm very interested in your cup lid applicator and wondered if you could tell me more about it?

John Antignane said:
I was told it is not perfect every time, and I have been watching every time I am at McD's most places do not use it. I asked the employees why they did not use the " top hat" they said it slow them down and it did not work most of the time. I am making a new type you might see it in the market place. I will send you one if you like....
"If I wanted something your finger had touched I would have ordered the inside of your ear."

I like the idea and see no downside for most shops. I do however often buy coffee from shops that practice coffee art and its a shame to cover the art with a lid.
Jarred Hoffpauir said:
"If I wanted something your finger had touched I would have ordered the inside of your ear."


Cute line. I'll have to remember that.

Honestly, though? If you want to avoid things that fingers had touched... well, all I can say is good luck with that.

An item in day one training when I started was the proper way to handle and install a lid. If you do it correctly you never touch the part where the customer drinks. If you are unable to master this little maneuver, I question how it is possible to do more complicated things, like make an espresso, steam milk, tie your shoe, etc.

I belive this is the answer to the Lid problems....

http://lidgrabber.intuitwebsites.com/

Thank you John. While this does not look like the one I saw at McD, i am sure it will work well.

I have contacted them to get more information and will share the info with the group (in case anyone

else is interested).

 

Ron, the Country Guy

I highly doubt you'll be getting a "fabulous" drink from a McDonalds.

 

I simply press the lid on and run a fingertip around the entire rim (nowhere near the sipping hole on the raised part of the lid) before handing it to the customer to make sure it's sealed. This takes just a few seconds... I will add that before preparing each drink I sanitize my hands. I personally don't like using the stuff constantly, but I'd say it adds peace of mind for the customer.

Ron Ingber said:

"Um, why?"

Two reasons:
1. It is much faster than putting the lid on by hand
2. When customers put the lid on, they often don't get it on tight all the way around. Who wants a fabulous drink dribbling down their chin and clothing.

Ron, the Country Guy

Reply to Discussion

RSS

Barista Exchange Partners

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2024   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service