Replies to This Discussion

Permalink Reply by Tom Mohr on March 28, 2011 at 10:05am

Do you have the one for a 5gal bottle. If you do use 1/4 line it is a push in fit. then use a fitting to the machine.

Permalink Reply by Kim Anderson on March 28, 2011 at 10:10am

We do have the one for the 5 gallon. But the white hose that comes w/ seems too small?

Permalink Reply by Kim Anderson on March 28, 2011 at 10:13am

I guess my ? is, "how do I connect the braided water hose from my pump, directly to the flowjet?"

Permalink Reply by Tom Mohr on March 28, 2011 at 12:06pm

Use the white line and buy a brass fitting from a hardware store not to hard just ask them and they will help the white line is what they call plex you can use a compresson fitting to a 3/8 male it should fit the braided water hose.

Permalink Reply by Kim Anderson on March 28, 2011 at 1:19pm

Thanks Tom!!

Permalink Reply by Tom Mohr on March 28, 2011 at 3:56pm

yw

Permalink Reply by Mike McGinness on March 28, 2011 at 10:13pm

Just an FYI don't be alarmed if shots are weird, a Flojet used by itself will result in a pulsing shot. I use this accumulator between Flojet and pump when catering for steady water pressure.

Permalink Reply by Tom Mohr on March 29, 2011 at 7:29am

That good to know when we do catering we use a pour over.

Mike McGinness said:

Just an FYI don't be alarmed if shots are weird, a Flojet used by itself will result in a pulsing shot. I use this accumulator between Flojet and pump when catering for steady water pressure.